Shure PGDX4 Digital Wireless system with SM58. This listing is for a fully tested and fully working PGDX4 wireless microphone system.
It comes with a SM58 Handheld and a SLX1 lavalier transmitter and mic. You will get the power supply, antennas. Please note there a minor issues which have not effected the usability.The SM58 handheld has some corrosion on the battery terminals. We put batteries in the unit and it fired up and worked perfectly.
We did a little bit of cleaning to the terminals just a precaution after we tested it and discovered it worked. We tried to take good pictures of this so you can see. Thanks for stopping by mrfixit- new and used electronics. Please Take a moment and check out my other great auctions. Got question feel free to ask me.For Small Venues and Conference Rooms. The Shure PGXD4 is a tabletop wireless receiver compatible with the PGXD1 bodypack and PGXD2 handheld transmitters. PGX-D digital systems offer high-quality, 24-bit / 48 kHz digital audio in a cost-effective, reliable package that's easy to use.
The lightweight tabletop receiver is highly portable, making it an excellent fit for on-the-go presenters, lecturers, fitness instructors, performers, and DJs working in small venues-including weddings, houses of worship, classrooms, offices, and conference spaces. The receiver offers true digital diversity, using two fixed, external antennas and two independent receiver circuits to ensure reliable transmission at a maximum line-of-sight range of up to 200'. Press the Scan button, and the receiver scans for a clean frequency.Press the Sync button, and the receiver and transmitter (available separately) lock to the same channel via infrared ports. That's it, you're up and running. If the RF environment changes and interference is heard, simply rescan and resync to operate on a new clean frequency. Up to 5 wireless mics can operate simultaneously in the same space.
196.9' / 60 m (Line of Sight). 1 x XLR 3-Pin Male Balanced Output. 1 x 1/4 Female Balanced/Unbalanced Output. 2.5 dBV (Mic Level).
20 Hz to 20 kHz (Dependent on Mic). 100 to 240 VAC, 50 / 60 Hz. 1 x LED (Channel, Group).1 x LED (AF Level). 1 x LED (Battery Status, RF Level). 0 to 122°F / -17 to 50°C. 7.1 x 1.6 x 4.1 / 181 x 40 x 104 mm. 10.2 oz / 289 g.
We are a two person outfit in central maine with a combine 78 years of experience in component level repair. We hold several degrees and certifications. We have also been warrantee techs in the past for Fender, Ampeg, Audio Centron, Crete, Yamaha, Mackie, Kustom, Peavey, Sharp and Toshiba. We use only the highest quality components in repairs we do, and we test test and test some more each product we repair. On average we allow units to run continuously for several hours to several days to make sure they will work as described and to spec.
We are absolutely thorough about making sure nothing leaves our shop substandard. We package everything in card board boxes. We make sure there is at least 3 inches of space between the product and the edge of the box. In large heavier items over 20 pounds we double box the item. These are the reasons why. No gimmicks or tricks here. What we will not do for you. What we will do for you. Make sure your item is nearly bullet proof....Well maybe not bullet proof but certainly disgruntled postal or courier proof. Example: If you bought 4 rubics cubes from us yes we will combine, but if you bought 2 large stage speaker enclosures then no. We won't combine as it would exceed limits of UPS or other couriers.
Good luck and we thank you for your business. We pride ourselves in excellent service. Please be patient with us and we will do everything we can to make sure that your experience is the best in the business. I encourage you to read through our feedback.
If you have questions about any of them please let us know. You will see a couple of negative feedbacks over the 24 years we have been in business. Sometimes you just can't please people. Of the couple of negative feedbacks you will note that they were small dollar items with unreasonable customers.